feat: add exe.dev usage tracking

packages/ui/src/lib/i18n/messages/de.settings.ts

@@ -2136,6 +2136,8 @@ export const settingsDict = {
   'settings.openchamber.visual.option.followUpBehavior.queue.label': 'Warteschlange',
 
   'settings.providers.page.quotaCredentials.accessToken': 'Zugriffstoken',
+  'settings.providers.page.quotaCredentials.usageToken': 'Nutzungs-API-Token',
+  'settings.providers.page.quotaCredentials.exeDevTokenInstructions': 'Führen Sie diesen Befehl im Terminal aus und fügen Sie dann das Token unten ein. Es kann nur die LLM-Guthabennutzung lesen und läuft nach 30 Tagen ab.',
   'settings.providers.page.quotaCredentials.refreshToken': 'Aktualisierungstoken',
   'settings.providers.page.quotaCredentials.tokenPlaceholder': 'Token einfügen',
   'settings.view.nav.group.general': 'OpenChamber',

packages/ui/src/lib/i18n/messages/en.settings.ts

@@ -13,6 +13,8 @@ export const settingsDict = {
   'settings.providers.page.openCodeGo.delete': 'Delete',
   'settings.providers.page.quotaCredentials.saved': '{provider} credentials saved.',
   'settings.providers.page.quotaCredentials.accessToken': 'Access token',
+  'settings.providers.page.quotaCredentials.usageToken': 'Usage API token',
+  'settings.providers.page.quotaCredentials.exeDevTokenInstructions': 'Run this command in your terminal, then paste the token below. It can only read LLM credit usage and expires after 30 days.',
   'settings.providers.page.quotaCredentials.refreshToken': 'Refresh token',
   'settings.providers.page.quotaCredentials.tokenPlaceholder': 'Paste token',
   'settings.providers.page.openCodeGo.saveFailed': 'Could not validate OpenCode Go credentials.',

packages/ui/src/lib/i18n/messages/es.settings.ts

@@ -13,6 +13,8 @@ export const settingsDict = {
   'settings.providers.page.openCodeGo.delete': 'Eliminar',
   'settings.providers.page.quotaCredentials.saved': 'Credenciales de {provider} guardadas.',
   'settings.providers.page.quotaCredentials.accessToken': 'Token de acceso',
+  'settings.providers.page.quotaCredentials.usageToken': 'Token de API de uso',
+  'settings.providers.page.quotaCredentials.exeDevTokenInstructions': 'Ejecuta este comando en tu terminal y pega el token abajo. Solo puede leer el uso de créditos de LLM y caduca después de 30 días.',
   'settings.providers.page.quotaCredentials.refreshToken': 'Token de actualización',
   'settings.providers.page.quotaCredentials.tokenPlaceholder': 'Pega el token',
   'settings.providers.page.openCodeGo.saveFailed': 'No se pudieron validar las credenciales de OpenCode Go.',

packages/ui/src/lib/i18n/messages/fr.settings.ts

@@ -13,6 +13,8 @@ export const settingsDict = {
   'settings.providers.page.openCodeGo.delete': 'Supprimer',
   'settings.providers.page.quotaCredentials.saved': 'Identifiants de {provider} enregistrés.',
   'settings.providers.page.quotaCredentials.accessToken': 'Jeton d’accès',
+  'settings.providers.page.quotaCredentials.usageToken': 'Jeton API d’utilisation',
+  'settings.providers.page.quotaCredentials.exeDevTokenInstructions': 'Exécutez cette commande dans votre terminal, puis collez le jeton ci-dessous. Il peut uniquement lire l’utilisation des crédits LLM et expire après 30 jours.',
   'settings.providers.page.quotaCredentials.refreshToken': 'Jeton d’actualisation',
   'settings.providers.page.quotaCredentials.tokenPlaceholder': 'Collez le jeton',
   'settings.providers.page.openCodeGo.saveFailed': 'Impossible de valider les identifiants OpenCode Go.',

packages/ui/src/lib/i18n/messages/ja.settings.ts

@@ -13,6 +13,8 @@ export const settingsDict = {
   'settings.providers.page.openCodeGo.delete': '削除',
   'settings.providers.page.quotaCredentials.saved': '{provider} の認証情報を保存しました。',
   'settings.providers.page.quotaCredentials.accessToken': 'アクセストークン',
+  'settings.providers.page.quotaCredentials.usageToken': '使用量 API トークン',
+  'settings.providers.page.quotaCredentials.exeDevTokenInstructions': 'このコマンドをターミナルで実行し、下にトークンを貼り付けてください。LLM クレジット使用量の読み取りのみが可能で、30 日後に期限切れになります。',
   'settings.providers.page.quotaCredentials.refreshToken': '更新トークン',
   'settings.providers.page.quotaCredentials.tokenPlaceholder': 'トークンを貼り付け',
   'settings.providers.page.openCodeGo.saveFailed': 'OpenCode Go の認証情報を検証できませんでした。',

packages/ui/src/lib/i18n/messages/ko.settings.ts

@@ -13,6 +13,8 @@ export const settingsDict = {
   'settings.providers.page.openCodeGo.delete': '삭제',
   'settings.providers.page.quotaCredentials.saved': '{provider} 인증 정보를 저장했습니다.',
   'settings.providers.page.quotaCredentials.accessToken': '액세스 토큰',
+  'settings.providers.page.quotaCredentials.usageToken': '사용량 API 토큰',
+  'settings.providers.page.quotaCredentials.exeDevTokenInstructions': '터미널에서 이 명령을 실행한 다음 아래에 토큰을 붙여 넣으세요. LLM 크레딧 사용량만 읽을 수 있으며 30일 후 만료됩니다.',
   'settings.providers.page.quotaCredentials.refreshToken': '새로 고침 토큰',
   'settings.providers.page.quotaCredentials.tokenPlaceholder': '토큰 붙여넣기',
   'settings.providers.page.openCodeGo.saveFailed': 'OpenCode Go 인증 정보를 검증할 수 없습니다.',

packages/ui/src/lib/i18n/messages/pl.settings.ts

@@ -13,6 +13,8 @@ export const settingsDict = {
   'settings.providers.page.openCodeGo.delete': 'Usuń',
   'settings.providers.page.quotaCredentials.saved': 'Dane uwierzytelniające {provider} zostały zapisane.',
   'settings.providers.page.quotaCredentials.accessToken': 'Token dostępu',
+  'settings.providers.page.quotaCredentials.usageToken': 'Token API użycia',
+  'settings.providers.page.quotaCredentials.exeDevTokenInstructions': 'Uruchom to polecenie w terminalu, a następnie wklej token poniżej. Może on tylko odczytywać użycie środków LLM i wygasa po 30 dniach.',
   'settings.providers.page.quotaCredentials.refreshToken': 'Token odświeżania',
   'settings.providers.page.quotaCredentials.tokenPlaceholder': 'Wklej token',
   'settings.providers.page.openCodeGo.saveFailed': 'Nie udało się sprawdzić danych OpenCode Go.',

packages/ui/src/lib/i18n/messages/pt-BR.settings.ts

@@ -13,6 +13,8 @@ export const settingsDict = {
   'settings.providers.page.openCodeGo.delete': 'Excluir',
   'settings.providers.page.quotaCredentials.saved': 'Credenciais de {provider} salvas.',
   'settings.providers.page.quotaCredentials.accessToken': 'Token de acesso',
+  'settings.providers.page.quotaCredentials.usageToken': 'Token da API de uso',
+  'settings.providers.page.quotaCredentials.exeDevTokenInstructions': 'Execute este comando no terminal e cole o token abaixo. Ele só pode ler o uso de créditos de LLM e expira após 30 dias.',
   'settings.providers.page.quotaCredentials.refreshToken': 'Token de atualização',
   'settings.providers.page.quotaCredentials.tokenPlaceholder': 'Cole o token',
   'settings.providers.page.openCodeGo.saveFailed': 'Não foi possível validar as credenciais do OpenCode Go.',

packages/ui/src/lib/i18n/messages/tr.settings.ts

@@ -13,6 +13,8 @@ export const settingsDict = {
   'settings.providers.page.openCodeGo.delete': 'Sil',
   'settings.providers.page.quotaCredentials.saved': '{provider} kimlik bilgileri kaydedildi.',
   'settings.providers.page.quotaCredentials.accessToken': 'Erişim token\'ı',
+  'settings.providers.page.quotaCredentials.usageToken': 'Kullanım API token\'ı',
+  'settings.providers.page.quotaCredentials.exeDevTokenInstructions': 'Bu komutu terminalde çalıştırın, ardından token\'ı aşağıya yapıştırın. Yalnızca LLM kredi kullanımını okuyabilir ve 30 gün sonra sona erer.',
   'settings.providers.page.quotaCredentials.refreshToken': 'Yenileme token\'ı',
   'settings.providers.page.quotaCredentials.tokenPlaceholder': 'Token\'ı yapıştır',
   'settings.providers.page.openCodeGo.saveFailed': 'OpenCode Go kimlik bilgileri doğrulanamadı.',

packages/ui/src/lib/i18n/messages/uk.settings.ts

@@ -13,6 +13,8 @@ export const settingsDict = {
   'settings.providers.page.openCodeGo.delete': 'Видалити',
   'settings.providers.page.quotaCredentials.saved': 'Облікові дані {provider} збережено.',
   'settings.providers.page.quotaCredentials.accessToken': 'Токен доступу',
+  'settings.providers.page.quotaCredentials.usageToken': 'Токен API використання',
+  'settings.providers.page.quotaCredentials.exeDevTokenInstructions': 'Виконайте цю команду в терміналі, а потім вставте токен нижче. Він може лише читати використання LLM-кредитів і діє 30 днів.',
   'settings.providers.page.quotaCredentials.refreshToken': 'Токен оновлення',
   'settings.providers.page.quotaCredentials.tokenPlaceholder': 'Вставте токен',
   'settings.providers.page.openCodeGo.saveFailed': 'Не вдалося перевірити дані OpenCode Go.',

packages/ui/src/lib/i18n/messages/zh-CN.settings.ts

@@ -13,6 +13,8 @@ export const settingsDict = {
   'settings.providers.page.openCodeGo.delete': '删除',
   'settings.providers.page.quotaCredentials.saved': '已保存 {provider} 凭据。',
   'settings.providers.page.quotaCredentials.accessToken': '访问令牌',
+  'settings.providers.page.quotaCredentials.usageToken': '用量 API 令牌',
+  'settings.providers.page.quotaCredentials.exeDevTokenInstructions': '在终端中运行此命令，然后在下方粘贴令牌。该令牌只能读取 LLM 积分用量，并将在 30 天后过期。',
   'settings.providers.page.quotaCredentials.refreshToken': '刷新令牌',
   'settings.providers.page.quotaCredentials.tokenPlaceholder': '粘贴令牌',
   'settings.providers.page.openCodeGo.saveFailed': '无法验证 OpenCode Go 凭据。',

packages/ui/src/lib/i18n/messages/zh-TW.settings.ts

@@ -13,6 +13,8 @@ export const settingsDict = {
   'settings.providers.page.openCodeGo.delete': '刪除',
   'settings.providers.page.quotaCredentials.saved': '已儲存 {provider} 憑證。',
   'settings.providers.page.quotaCredentials.accessToken': '存取權杖',
+  'settings.providers.page.quotaCredentials.usageToken': '用量 API 權杖',
+  'settings.providers.page.quotaCredentials.exeDevTokenInstructions': '在終端機中執行此命令，然後在下方貼上權杖。該權杖只能讀取 LLM 點數用量，並將在 30 天後到期。',
   'settings.providers.page.quotaCredentials.refreshToken': '重新整理權杖',
   'settings.providers.page.quotaCredentials.tokenPlaceholder': '貼上權杖',
   'settings.providers.page.openCodeGo.saveFailed': '無法驗證 OpenCode Go 憑證。',

packages/ui/src/lib/quota/providers/index.ts

@@ -23,6 +23,7 @@ export const QUOTA_PROVIDERS: QuotaProviderMeta[] = [
   { id: 'opencode-go', name: 'OpenCode Go' },
   { id: 'crof', name: 'CrofAI' },
   { id: 'deepseek', name: 'DeepSeek' },
+  { id: 'exe-dev', name: 'exe.dev' },
   { id: 'neuralwatt', name: 'NeuralWatt' },
   { id: 'xai', name: 'xAI' },
 ];