The parenthetical explanations wrapped to two lines and added little — the
section header already gives context and the two terms are self-explanatory.
It was rendered in the middle of the checkbox list, where a labeled radio
group reads as out of place. Move it into the radio/choice cluster, right
after Diff Layout, and drop it from the checkbox section's visibility gate.
* feat: support OpenCode steer delivery / follow-up behavior settings
Implements issue #1766 — steer delivery mode for mid-turn message
insertion, replacing the old boolean queue-mode toggle with a tri-state
follow-up behavior setting (Steer / Queue / Send immediately).
- Plumbing: threaded optional delivery: 'steer' through sendMessage
-> routeMessage -> opencodeClient.sendMessage -> promptAsync
- Store: messageQueueStore stores followUpBehavior; migration from
legacy queueModeEnabled persisted state
- Settings: Chat -> Follow-up behavior shows three radio options
using existing settings UI patterns
- Composer: when session is busy, a floating queue button remains;
force-sending a queued message (via chip click) uses delivery: 'steer'
during a busy session; Steer button intentionally omitted — steer is
available via the two-gesture path (Enter to queue -> chip to steer)
- Keyboard: queue mode = Enter queues, Ctrl+Enter sends; otherwise
Enter sends, Ctrl+Enter queues
- Persistence: DesktopSettings, web settings payload, and server-side
sanitizer handle the new key with legacy fallback
- i18n: follow-up behavior section and option labels in all 9 locales
plus new chat.chatInput.actions.queue label
- Search: settings registry updated from chat.queue-mode to
chat.follow-up-behavior
Validation: type-check passes (no new errors), lint clean.
* fix(#1766): make steer mode actually steer
The followUpBehavior === 'steer' branch in handlePrimaryAction and the
keyboard handler was a no-op — both fell into the else branch and sent
without the delivery: 'steer' flag, so selecting 'Steer (insert into
the running turn)' in settings produced identical behavior to 'Send
immediately'.
- handlePrimaryAction: when steer mode is selected and the session is
busy, call handleSubmit({ delivery: 'steer' }) directly
- Keyboard handler: in steer mode, Enter steers and Ctrl+Enter sends
immediately (consistent with queue mode where Ctrl+Enter bypasses
the special handling)
Also removes the unused chat.chatInput.actions.queue i18n key from all
9 locales (it was a dead key after the Steer button was removed from
the composer).
Validation: type-check clean, lint clean.
* refactor(#1766): flatten nested ternary in followUpBehavior resolution
Replace nested ternary with explicit if/else chain per project code style
(CONTRIBUTING.md). Import FollowUpBehavior type explicitly for the new
let declaration.
* feat(chat): drop redundant 'immediate' follow-up mode, keep Queue + Steer
'Immediate' was wire-identical to 'Steer' on a busy session: OpenCode only
supports delivery 'steer' | 'queue' and defaults to 'steer', so an immediate
send (no delivery flag) already steered into the running turn. The three-mode
UI therefore exposed two settings that did the same thing.
Collapse to two modes — Queue (unchanged: client-side queue with edit/reorder)
and Steer. Any persisted/legacy 'immediate' (and legacy queueModeEnabled=false)
now maps to 'steer', preserving prior behavior. Removes the immediate option,
its keyboard branch, the i18n label across all locales, and narrows the
followUpBehavior union to 'steer' | 'queue'.
---------
Co-authored-by: Leonid Skorobogatyy <bash@opencode.itc.local>
Co-authored-by: Bohdan Triapitsyn <artmore@protonmail.com>
* fix(worktree): include sessions when deleting worktree group from sidebar
allGroupSessions was guarded by group.isArchivedBucket, returning [] for
active worktree groups. This caused the 'delete worktree' button in the
sidebar to send an empty session list — SessionDialogs only removed the
git worktree directory and skipped archiving any sessions, leaving them
orphaned.
Remove the guard so all sessions (including recursive children /
subagent sessions) are collected regardless of archived state.
* fix(sessions): delete all descendants on hard-delete instead of relying on server cascade
The previous code sent only the root session ID and assumed the server
would cascade-delete all children. If the cascade failed, children were
left orphaned. Delete root + descendants individually; 404 responses
from already-cascade-deleted children are treated as success.
* fix(sessions): clear worktree metadata when deleting a session
Deleted sessions kept their worktree attachment in both
session-worktree-store and session-ui-store. Clean it up on successful
deletion and on 404 (already deleted).
* fix(worktree): search subagent sessions across all directories before delete
WorktreeSectionContent and BranchPickerDialog used useSessions(), which
is scoped to the current sync directory. Subagent sessions created in
other worktrees/project roots were missed and left orphaned. Search
across active + archived global sessions when collecting descendants.
---------
Co-authored-by: Leonid Skorobogatyy <bash@opencode.itc.local>
Co-authored-by: Bohdan Triapitsyn <artmore@protonmail.com>
The stale-event check excluded heartbeats from lastActiveEventAt, so a
quiet-but-connected session (only receiving heartbeats) tripped the 20s
stale timer and triggered a full resync every ~15s. This re-fetched
listPendingQuestions, listPendingPermissions, session.get, and
session.messages despite the event stream being healthy.
Track all stream activity (including heartbeats) in a global
lastStreamActivityAt ref. The stale check now only fires when no events
at all arrive for 20s, meaning the stream is genuinely dead.
Resyncs still fire correctly on genuine reconnects, transport switches,
and status-poll escalation when a real discrepancy is detected.
Fixes#1656
When clicking a session inside a worktree group, the layout effect in
useProjectSessionSelection could override the user's selection with the
project's first root session. This happened because projectSections
(and thus projectSessionMeta) might not yet include the worktree group
on the first render after the click.
The fix adds a guard: if currentSessionId is set but not found in the
current projectMap (stale data), the effect returns early instead of
falling through to auto-selection logic.
Fixes#1804
Co-authored-by: Leonid Skorobogatyy <bash@opencode.itc.local>
Watching N worktrees fired N PR-status requests at once (startWatching
called refresh() directly, bypassing the batch limiter). Each request can
take 20s+ under GitHub secondary-rate-limiting, and N of them saturate the
browser's ~6 HTTP/1.1 connections per origin, starving the critical path
(bootstrap session.status, diffs, sending messages) until they finish — the
UI appeared frozen for ~20s on startup.
- Gate all PR-status network calls through a global concurrency semaphore
(max 2), so free sockets always remain for critical traffic.
- Bound resolveGitHubPrStatus with a 12s timeout so a slow request fails
fast instead of holding a socket; the client keeps its last-known status.
- Reuse already-fetched repo metadata for the default branch instead of a
redundant repos.get, reducing serial GitHub calls (less rate-limiting).
Redesign the mobile composer model and agent buttons as borderless, full-bleed
labels that hug their content, truncate with an ellipsis when space is tight,
and show the provider logo inline before the model name. Tighten the footer
action buttons (sessions / attach / auto-accept) so they sit close together,
with a small left inset on the group. In the mobile model selection overlay,
make the thinking-variant control text-only with a chevron, vertically center
the variant and favorite controls in each row, and place the provider logo
inline with the model name.
Give touch surfaces a larger, viewport-relative head start for loading older
history so an in-flight fetch completes before the finger reaches the top.
Raise the mobile virtualizer overscan so fast flings stay populated instead of
leaving blank gaps, and drop the fixed itemSize hint so virtua auto-estimates
row heights from measured sizes instead of a flat constant.
Gate passive auto-follow on active (working/settling) state so idle layout
churn from virtualizer re-measurement no longer re-pins the viewport to the
bottom. Render default-open tool bodies synchronously on mount so the
virtualizer measures the real row height up front instead of growing a frame
later and lurching scroll past several messages.
The mobile stylesheet at packages/ui/src/styles/mobile.css defines a
@media (max-width: 1024px) block that overrides the --text-ui-header,
--text-ui-label, --text-meta, and --text-micro custom properties to
shrink labels on phones. The values it was setting were equal to (or
only 1px smaller than) the desktop defaults, so the model selector,
agent selector, and any other element using these classes rendered at
the same size on a 360px-wide phone as on a 1920px desktop.
Fix: tighten the mobile values to 0.875rem (ui-header), 0.75rem
(ui-label, meta), and 0.6875rem (micro), so that mobile is genuinely
smaller than desktop. The same change is applied to the iOS PWA
standalone block lower in the file so both code paths produce the same
size.
Fixes#504
Signed-off-by: Bohdan Triapitsyn <artmore@protonmail.com>
Co-authored-by: James Pinnell <james@example.com>
Co-authored-by: Bohdan Triapitsyn <artmore@protonmail.com>
Marks active embedded chat sessions as seen only while focused
Shows real session titles for context panel chat tabs
Names review sessions after the implementation session
Show a count of chats (root sessions) with unseen activity on the macOS
dock icon. The count is computed in the existing tray snapshot (full
cross-project list, not the capped tray view; a subtask's unseen rolls up
to its root only when subtask notifications are enabled) and pushed to the
main process over the existing desktop_tray_update IPC, which calls
app.setBadgeCount (0 clears it). The badge clears as sessions are marked
seen on window focus.
Add a Dock badge toggle in Appearance settings (default on, persisted,
darwin desktop only), localized across all dictionaries, with a matching
settings-search entry whose availability mirrors the render guard exactly.
Replace the RAF easing follow loop + settle burst with an always-on
instant-follow model: while pinned, the content ResizeObserver re-pins to
the bottom synchronously (scrollTop = scrollHeight, before paint) and is
the only writer of scrollTop. A position+TTL auto marker distinguishes our
own programmatic writes from genuine user scrolling, so a scroll event that
lands at the just-written bottom never trips a false release.
This removes the feedback loop where the easing animation, growing content,
and the user's own scroll all fought for scrollTop in the same frame -- the
infinite twitch when scrolling down during streaming, and the jiggle on
send / from the queue. The public hook interface is unchanged; all
consumers keep working untouched.
Entering a historical session sometimes showed a smooth scroll from a mid
position instead of landing instantly at the bottom. The single-writer change
had startFollowLoop stop the settle burst, so a content-measurement
ResizeObserver tick during restore would downgrade the authoritative instant
pin into an easing follow loop that scrolled in from the partially-measured
position.
- startFollowLoop now yields to an active settle burst instead of stopping it.
The asymmetry is intentional: the settle burst is the authoritative instant
pin (session restore / goToBottom 'instant') and must not be preempted by the
easing loop. startSettleBurst still stops the follow loop, so the two never
write scrollTop in the same frame.
- tickFollow snaps deltas larger than a full viewport (discrete jumps: late
history measurement, session entry, a big block in one commit) instead of
easing them; only small streaming-sized deltas ease.
- restoreSnapshot mirrors goToBottom('instant') — instant write + settle burst,
no startFollowLoop.
Two scroll owners were writing the chat container's scrollTop concurrently
during pinned content growth and on send, fighting frame-to-frame and
producing the reported flicker/jiggle (after a pause, from the queue, on user
interruptions) plus a visible double scroll on a normal user send.
Enforce a single-writer invariant in useChatAutoFollow:
- The easing follow loop and the instant settle burst now mutually exclude:
starting one stops the other, so they can never write scrollTop in the same
frame. The isFollowingProgrammatically flag (which suppresses the overlay
scrollbar) is owned by whichever loop is active and cleared only when both
are idle, including the settle burst's natural 280ms end.
Stop the redundant re-pin storm in useChatTimelineController:
- While pinned, route goToBottom('instant') only for a prepend (history loaded
above), not on every bottom append / streaming part. Normal growth is owned
by the follow loop (kicked by the content ResizeObserver and chunk handlers).
Remove the double movement on send:
- Add scrollToBottomOnSend: when already following, just (re)kick the follow
loop for a single smooth movement instead of also firing an instant
goToBottom that raced the ResizeObserver-driven loop. When released (scrolled
up), keep the instant jump to the just-sent message.
loadProviders dropped the __add_provider__ sentinel selection during a
background provider refresh because it is not a real provider id, which
navigated users out of the in-progress Add provider form and discarded
their unsaved input. Preserve the sentinel alongside real provider ids.
Fixes#1765
* feat(shortcuts): make 'Open model selector' shortcut customizable
Lets users remap the model selector shortcut (e.g. to Ctrl+M) via
Settings > OpenChamber > Shortcuts, matching OpenCode's quick
model-switch keybinding workflow.
Co-authored-by: Serhii Dziupin <makeittech@users.noreply.github.com>
* fix(agents): surface manual-restart needed when on external OpenCode
Agent prompt/permission/settings edits are written to disk, but an
external OpenCode server (skip-start or auto-detected on the default
port) is not owned by OpenChamber and is only health-probed on config
change, so it keeps serving its startup-cached config until restarted.
The API previously claimed a successful reload, so the UI silently
reverted the edit to the stale/default value on refresh.
Now refreshOpenCodeAfterConfigChange reports whether a real reload
happened; agent routes return requiresManualRestart for external mode;
and the agents UI keeps the saved values and warns the user to restart
their OpenCode server instead of showing a false success. Managed mode
behavior is unchanged (process is restarted and reload is live).
Co-authored-by: Serhii Dziupin <makeittech@users.noreply.github.com>
---------
Co-authored-by: Serhii Dziupin <makeittech@users.noreply.github.com>
* feat(model-picker): drag-to-reorder providers and persist accordion state
Ports two model/provider picker QoL features from otto-ui:
- Persist collapsed state of picker sections (favorites, recent, each
provider) via a new persisted zustand store so collapse survives
remounts and reloads, shared across every picker surface.
- Desktop drag-to-reorder of provider sections (whole header as the
mouse activator, 8px threshold so a plain click still toggles
collapse), with the order persisted in useUIStore.providerOrder and
applied across ModelControls, ModelMultiSelect and ModelSelector.
Co-authored-by: Serhii Dziupin <makeittech@users.noreply.github.com>
* feat(sessions): shift-click quick action hard-deletes thread without prompt
Ports the shift-quick-delete feature from otto-ui. The sidebar quick
action (normally archive) becomes a no-prompt hard delete while Shift is
held: the icon switches to a trash bin, the affordance turns destructive,
and the click bypasses the confirmation dialog via a new skipConfirm
source flag. A shared useShiftKeyHeld hook (single window listener set,
useSyncExternalStore) keeps only the small action button re-rendering on
Shift state changes, and resets on window blur so the affordance can't
get stuck after alt-tab.
Co-authored-by: Serhii Dziupin <makeittech@users.noreply.github.com>
---------
Co-authored-by: Serhii Dziupin <makeittech@users.noreply.github.com>
Removes missing expanded folders from persisted Files state
Prevents repeated 404 noise for stale file tree paths
Avoids startup SDK race when restoring sessions
Invalidates cached group ordering when reorder state changes
Keeps dragged worktree groups in the new position immediately after drop
Validated with UI package type-check
Uses the linked target session's last model choice for follow-up review transfers
Prevents reviewer thinking settings from leaking into implementer follow-ups
Sending a message while a question prompt was open left the prompt
lingering, blocked the send, or collided with the still-blocked agent
turn. Two root causes:
useSessionActivity treated pending permissions as idle but not pending
questions, so the send button became Stop during a question and Enter
queued/collided instead of sending. handleSubmit also never dismissed
the open question, stranding the session in a half-answered state.
The send path now dismisses open questions for the session subtree
(optimistic local clear so the card vanishes instantly, plus a formal
question.reject) and queues the message. The queued-message auto-send
hook then delivers it as the next turn once the rejected turn winds
down and the session returns to idle. Queueing avoids aborting the
turn, which surfaced an unwanted "running turn was stopped" notice.
Regression tests cover the no-op, subtree dismissal (root + subagent
child), and QuestionNotFoundError paths.
When older history is prepended while the viewport is pinned to the bottom, the
timeline controller wrote the re-pin manually (scrollTop += delta). That write
is not flagged as programmatic, so useChatAutoFollow's scroll handler treated it
as movement and issued its own correcting scroll — a redundant up/down move on
every prepend. On most setups it settles after one move, but with different
virtualizer measurement/timing it never converges, producing the reported
infinite up/down scroll glitch.
When pinned, delegate the prepend re-pin to auto-follow's goToBottom('instant'):
a single authoritative write to the bottom that IS marked programmatic, so
auto-follow ignores it instead of fighting it. The released case (user reading
back through history) is unchanged and still preserves the read position.
This also covers the on-open history auto-load (loadEarlierIfPinnedViewport-
Underfilled), which only runs while pinned, so its prepends now go through the
single writer too.
Release auto-follow based on position (the user has left the near-bottom zone)
instead of scroll-delta direction. The old `currentTop < previousTop` check
treated the tiny scrollTop clamp the browser applies when the composer grows —
which keeps you at the bottom — as a user scroll-up and released follow, so
content finishing loading then drifted the view backward.
Also always return to the bottom on session switch, dropping the saved-ratio
restore: it had a low success rate and, by landing 'released' partway up,
produced the same visible backward jump as content finished loading.
overflow-anchor is already disabled on the chat scroll container, so no
delta-threshold workaround is needed; this is a net simplification.
Replace useEffect with useLayoutEffect in the pendingInitialRestoreRef
replay so restoreSnapshot runs synchronously after DOM commit, before
the browser paints. Prevents visible flash of content at the wrong
scroll position when the scroll container mounts after session
hydration.
Adapted from openchamber/openchamber#1553 (Fix 2). The virtualVersion
counter (Fix 1) is not applicable: virtua (post #1651) does not use
useVirtualizer's useState-based instance pattern that motivated it.
Validation:
- bun --cwd packages/ui type-check - no new errors in useChatAutoFollow.ts
- bun --cwd packages/ui lint - passed
Co-authored-by: herjarsa <herjarsa@users.noreply.github.com>
When clearing temperature or topP on an existing agent, the UI sent
undefined which JSON.stringify drops, so the server never received the
clear command. Now sends null to properly remove the override in
opencode.json.
Changed updateAgent to use 'field' in config pattern for temperature
and top_p, matching the existing prompt handling.
Co-authored-by: Leonid Skorobogatyy <bash@opencode.itc.local>
Co-authored-by: Bohdan Triapitsyn <artmore@protonmail.com>
Keeps implicit new sessions tied to the current directory
Prevents unmatched directories from inheriting the active project
Adds regression coverage for draft project selection
Bohdan Triapitsyn