Virtualize message timeline at 5+ turns. Stabilize virtualizer keys,
add prepend-aware scroll compensation for "Load older", and defer
expanded tool bodies by one animation frame. Tighten initial turn
window to 7 turns for faster session open.
The previous system layered three hooks (useScrollEngine, useChatScrollManager,
useChatTimelineController) with overlapping responsibilities, four parallel
ResizeObservers/MutationObservers, and six entry points to "scroll to bottom"
(force-flag combinations, persistent follow loops, materialization recovery).
This produced bugs where users could not break free of auto-follow during
streaming: scrollbar drag, keyboard scrolling and find-in-page were not
detected as user intent, and observers kept restarting the follow loop on
every DOM mutation.
The new architecture replaces the two low-level hooks with a single
useChatAutoFollow that owns scroll behaviour end to end:
- One state: 'following' or 'released'. No follow modes, no pin flags,
no marker pixels.
- One scroll writer: a lerp loop that runs only while the session is
streaming and state is 'following'. Idle sessions never write scrollTop
programmatically.
- One user-intent detector: wheel up, touch drag down, keyboard
(PageUp / Home / ArrowUp), pointerdown on the OverlayScrollbar thumb,
and explicit releaseAutoFollow() calls all flip the state to 'released'.
- A 1.2s grace period after explicit release: re-pin will not auto-engage
inside this window, so a small wheel up cannot snap the user back even
while they remain near the bottom spacer.
- Re-pin and the scroll-to-bottom button share the same threshold: the
height of the empty bottom spacer (10vh on desktop, 40px on mobile).
Released users see the button only after they have scrolled past the
spacer that already exists at the end of the chat.
- Save/restore of scroll position uses ratio mapping, debounced at 150ms
on user-driven scroll events; programmatic writes are masked via a short
window so they never persist as user positions.
- Container reattachment is detected via a useLayoutEffect probe over
scrollRef.current. Listeners and observers re-bind when ChatViewport
mounts after hydration or after the first message promotes a draft
session into a real chat.
- A pending-restore queue replays restoreSnapshot once the scroll
container appears, fixing the case where a hydrating session landed at
the top instead of the bottom.
Removed: useScrollEngine.ts, useChatScrollManager.ts, the persistent
follow loop with its own ResizeObserver+MutationObserver pair, the
materialization-recovery .finally resume that yanked idle users to the
bottom on transient sync gaps, and the openchamber:session-reselected
event (re-select still works through the existing onSessionSelected
callback). The openchamber:chat-force-scroll-bottom event remains for
synthetic-message paths like git-message generation.
Net change: ~1300 lines removed, two hooks replaced with one, one
observer pair instead of four.
Add dedicated Electron Mini Chat windows for focused chat sessions without the full desktop shell. Mini Chat can open existing sessions or draft sessions, supports pinning above other windows, transfers sessions or drafts back to the main window, and deduplicates existing-session windows.
Expose Mini Chat entry points from the main header, session sidebar, command palette, and `mod+alt+n`. Add a dedicated Vite entry and React runtime so the compact surface can stay isolated from full-app chrome while still sharing chat, sync, theme, locale, model, agent, and worktree behavior.
Keep Mini Chat behavior scoped to the compact surface:
- limit assistant/user message actions to the appropriate Mini Chat set
- hide workspace changed-files UI in Mini Chat
- keep draft worktree selection and streaming directory state in sync
- mark sessions viewed while they are open in Mini Chat
- support Mini Chat-specific keyboard shortcuts for input focus, model selection, thinking variant cycling, favorite model cycling, and opening new Mini Chat drafts
Harden Electron integration by gating Mini Chat controls on desktop IPC availability, restricting pin/unpin IPC to Mini Chat windows, and only closing Mini Chat after the main window handoff succeeds.
Use base-ui's transition-status pattern (data-starting-style /
data-ending-style) for Dialog, DropdownMenu, Select, Tooltip and Popover
so open/close animate consistently at 150ms ease-out without flicker.
Wrap dialog popups in a centered flex container so the scale animation
no longer fights with translate-based positioning, and switch
PendingChangesBar to a real Popover so it actually animates closed.
Convert ScheduledTaskEditorDialog from raw Radix to the shared Dialog
wrapper, give ScheduledTasksDialog a stable min-height to prevent layout
shift mid-animation, and reset NewWorktreeDialog form state on open
instead of close so fields don't empty during the close transition.
Drop tooltip delay from 700ms to 300ms globally and remove all
per-component overrides except the model/variant/agent selectors in the
chat input (600ms).
* feat: embedded preview proxy for local dev servers
Add a same-origin server proxy under /api/preview/proxy/:id and
matching UI surfaces so local dev servers (Vite, Next, etc.) can be
embedded inside OpenChamber.
Server (packages/web/server):
- New lib/preview/proxy-runtime.js: cookie-gated HTTP+WebSocket proxy
to loopback hosts only, with TTL'd targets and SSRF allowlist.
- index.js wires the runtime alongside terminal/event-stream.
UI (packages/ui):
- ContextPanel preview tab with iframe, reload, and open-in-browser.
- Inline html code-block preview in MarkdownRenderer.
- Terminal auto-detects loopback URLs and offers to open them.
- i18n keys across en, es, pt-BR, uk, zh-CN.
* perf(preview): cache proxy targets across PreviewPane remounts
Module-scoped Map keyed by upstream URL so tab switches and component
remounts within the same page session reuse the existing proxy
registration instead of POSTing a fresh target each time.
In-memory only by design: the server holds the target map in memory
and the auth cookie is HttpOnly + scoped to the proxy id, so a stale
persisted entry would 404 after a server restart. Entries are evicted
on registration error and on a 30s safety margin before TTL expiry.
* feat(preview): surface dev-server-down state with retry overlay
Iframes don't expose HTTP status to the parent, so when the proxy
returns a 502 (upstream dev server is offline) the iframe just renders
the raw JSON error body. Probe the proxy URL out-of-band with HEAD
(falling back to GET on 404/405) and replace the iframe with a
friendly 'Dev server is not responding' overlay + retry button when
the upstream is unreachable.
Re-probes on reload, on URL change, and on proxy re-registration.
* feat(preview): strip frame-busting response headers
Many dev servers (Next.js, others) send X-Frame-Options: SAMEORIGIN
and/or a CSP with frame-ancestors that block embedding inside the
OpenChamber iframe. The proxy is same-origin and already
authenticated per-target, so embedding is otherwise safe.
- Drop X-Frame-Options outright on proxied responses.
- Surgically remove only the frame-ancestors directive from
Content-Security-Policy and Content-Security-Policy-Report-Only,
preserving every other directive. Drops the header entirely if no
directives remain.
- Verified end-to-end: upstream sending both headers comes through
with X-Frame-Options removed, CSP retaining default-src/script-src
but no frame-ancestors, and unrelated headers untouched.
* docs(preview): design for remote-host relay agent
Design-only doc for the next phase of the embedded preview feature:
when OpenChamber runs remotely (cloud/shared/tunnel) and the user's
dev server runs on their local machine. Covers architecture (local
agent + outbound control WebSocket + server dispatch), pairing flow,
wire protocol, security model, failure modes, open questions, and
implementation milestones. No code changes.
* feat(preview): auto-open preview pane for loopback URLs in chat
Detect http(s) loopback URLs in incoming assistant messages and open the
preview pane automatically, deduped per (session, url) pair so re-renders
or repeated mentions do not steal focus. Add an inline Preview button
next to loopback links in chat markdown as a manual fallback when the
auto-open was dismissed or the URL appeared in an older message.
- url.ts: isLoopbackHttpUrl / extractLoopbackUrls helpers
- ChatContainer: module-level dedupe Set + effect on active session tail
- MarkdownRendererImpl: optional onPreviewLoopback in main renderer only
(SimpleMarkdownRenderer for tool diffs is intentionally untouched)
- Reuses existing terminalView.preview.open i18n keys
* feat: preview enhancements, dev shutdown, and reliability fixes
Add preview start/stop UI in ContextPanel/Header, improve URL detection (Python HTTP server logs, trailing punctuation, IPv6 loopback), fix proxy path filtering to avoid disrupting non-preview WebSockets. Add dev-only /api/system/dev-shutdown endpoint and Header button to terminate local dev processes and orphaned preview servers. Improve terminal cleanup with process group killing, event pipeline reconnect backoff. Update file read APIs with optional flag and cache control. Add /api/system/free-port endpoint, detectDevServer.ts utility, and preview/shutdown i18n strings for 5 languages.
* fix: harden preview support
* fix: keep terminal toolbar interactive
* fix: keep expanded terminal below header
* fix: keep preview iframe under proxy path
* fix: respect project action preview urls
* fix: rewrite preview asset urls
* feat: capture preview console logs
* feat: annotate preview elements
* feat: attach preview annotation screenshots
* fix: improve proxied preview hmr
* feat: refine preview action UX
* fix: address preview review feedback
* fix: show auto-discover preview wait state
---------
Co-authored-by: William Biggers <will@Williams-MacBook-Pro.local>
Co-authored-by: Bohdan Triapitsyn <artmore@protonmail.com>
* Add design spec: OpenCode readiness loading indicator
* Add implementation plan: OpenCode readiness loading indicator
* feat: add useOpenCodeReadiness hook
* feat: add i18n keys for common.loading
* feat: add loading state to ModelSelector
* feat: add loading state to AgentSelector
* feat: add loading state to ModelControls chat selectors
* update package-lock
* feat(github): add shared fork detection utility
* feat(github): make issue listing fork-aware
* feat(github): make PR listing fork-aware
* feat(types): add sourceRepo to issue/PR summary types
* feat(ui): add source badges to GitHub integration dialog
* feat(ui): add source badges to issue/PR picker dialogs
* feat(github): pass headRemote in PR creation for fork support
* feat(ui): add source→target label in PR tab for fork workflows
* fix(github): allow PR section on base branch when upstream remote exists
* fix(github): show PR section on any branch including main for fork→upstream PRs
* fix(github): allow PullRequestSection to render on base branch when upstream remote exists
* feat(github): auto-detect upstream repo for fork→upstream PR creation
- Add GET /api/github/repo/upstream endpoint to discover fork's upstream
- Fix PullRequestSection canShow to allow PR creation on base branch when repo is a fork
- Add virtual upstream target in remote dropdown (no explicit upstream remote needed)
- Add targetRepo parameter to /api/github/pr/create for direct upstream targeting
- Add repoUpstream() API client method and GitHubRepoUpstreamResult type
* feat(github): auto-detect upstream repo for fork→upstream PR creation
- Add GET /api/github/repo/upstream endpoint to discover fork's upstream
- Fix PullRequestSection canShow to allow PR creation on base branch when repo is a fork
- Add virtual upstream target in remote dropdown (no explicit upstream remote needed)
- Add targetRepo parameter to /api/github/pr/create for direct upstream targeting
- Add repoUpstream() API client method and GitHubRepoUpstreamResult type
* fix: complete fork→upstream PR workflow
- Server: return defaultBranch from /api/github/repo/upstream endpoint
- Server: fix cross-repo head ref construction (compare repos, not remote names)
- Server: filterActiveRemoteBranches checks all remotes, not just origin
- UI: set targetBaseBranch to upstream's default branch when using detected upstream
- UI: include all remote branches in base branch dropdown when using detected upstream
- UI: skip base===head check for cross-repo PRs (same branch name on different repos is valid)
- Types: add defaultBranch to GitHubRepoUpstreamResult
* chore: delete superpowers folder
* feat: add (local)/(remote) labels to PR branch display and adapt Repository button to selected remote
* feat: Repository button adapts to selected remote (upstream vs origin)
* fix: complete fork→upstream PR feature gaps
Server:
- Extend /api/github/repo/upstream to return defaultBranchSha and remoteName
- Reuse headRepo result instead of redundant resolveGitHubRepoFromDirectory call
- Return clear error when headRepo is null (invalid GitHub URL)
UI:
- Add upstream's default branch to availableBaseBranches when using detected upstream
- Use upstream's default branch SHA in git log for generate description (fixes 'No commits found in range main...main')
- Show qualified names (owner/repo · branch) in base branch dropdown when using detected upstream
Types:
- Add defaultBranchSha and remoteName to GitHubRepoUpstreamResult
* fix: move detectedUpstream state before availableBaseBranches to fix temporal dead zone
* fix: fetch upstream branches from GitHub API for base branch dropdown
- Add GET /api/github/repo/branches endpoint to fetch branches via Octokit
- Add repoBranches() to GitHub API client and interface
- Fetch upstream branches on detection and store in upstreamBranches state
- Include upstreamBranches in availableBaseBranches when using detected upstream
- Re-add availableBaseBranches memo and auto-correction effect that were lost
- Remove unnecessary qualified names from dropdown (upstream is already selected)
* fix: restore prStatusKey and statusEntry declarations lost during refactor
* fix: cleanly re-apply all fork→upstream PR UI changes
Restored PullRequestSection.tsx from clean base and re-applied:
- Expand detectedUpstream type with defaultBranch, defaultBranchSha, remoteName
- Add upstreamBranches state and fetch on upstream detection
- Include upstream branches in availableBaseBranches when using detected upstream
- Use upstream default branch SHA in generate description (fixes 'No commits found')
- Adapt Repository button URL to selected remote
- Add (local)/(remote)/(upstream) labels to branch display
* fix: move detectedUpstream/upstreamBranches before availableBaseBranches to fix TDZ
* style: add pill badge styling to upstream repo source labels
* fix: don't cache error PR status responses, allow force-bypass of server cache
* fix: resolve PR status cache bugs, stale directory fallback, and upstream re-detection
* fix: keep collapse button visible when scrolling long user messages
- Collapse button now sticks to top of scrollable user message content instead of scrolling away
* fix: checkbox focus ring blends into sidebar background
* fix: polish fork PR follow-ups
* fix: remove user message collapse artifact
* fix: tighten fork PR internals
* fix: check all remotes for fork PR status
* fix: recover sidebar PR status misses
---------
Signed-off-by: Islam Nofl <islamnofl.official@gmail.com>
Co-authored-by: Bohdan Triapitsyn <artmore@protonmail.com>
* fix: exclude file content from reverted prompt text
Revert and fork now restore only the user's original prompt, not server-injected file content
Uses existing isSyntheticPart helper for type-safe filtering
* fix: keep scrollbar visible when hovering over thumb
* fix: prevent ESC abort from triggering when terminal is focused
* fix: pass directory to permission/question reply calls so approvals actually resolve
* fix: default model selection not responding after Base UI migration
* fix: prevent modal content from shifting and clipping footer buttons
* fix: improve session switching performance and add sub-agent export with prompt collapse
Defer viewport anchor saving to eliminate ~800ms UI freeze when switching sessions
Add export dialog to include sub-agent tasks recursively in markdown export
Add collapse chevron button for expanded user prompts in sticky header
* fix: resolve sidebar scroll and TDZ crash in session sidebar
* perf: reduce CPU overhead and re-renders across chat, layout, and settings
* fix: position collapse button at top of message and prevent ESC abort in terminal
* fix: position collapse button at top and add padding only when expanded
* refactor: extract shared PATH utilities and mobile keyboard hook
* refactor: import shared path-utils in electron, use module-level style constants
- Electron now imports pathLooksUserConfigured/mergePathValues from
shared path-utils.js instead of inline duplication
- ToolPart collapsedCustomStyle moved from useMemo([]) to module const
* fix: resolve remaining merge conflicts and type errors
- Remove duplicate variable declarations in SessionNodeItem
- Remove orphaned export callback body from conflict resolution
- Fix HelpDialog description -> descriptionKey (i18n rename)
* fix: resolve type-check and lint errors in session-actions.test.ts
- Added missing bun:test type declarations (beforeEach, mock, mock.module)
- Removed unused State import
- Replaced 'as any' casts with proper OpencodeClient and ChildStoreManager types
- Added eslint-disable for unused _ parameter in mock function
* fix PR 1028 export and PATH edge cases
* fix startup retry exhaustion state
* remove opencode package lock change
* fix sub-session rename cancellation
---------
Co-authored-by: Bohdan Triapitsyn <artmore@protonmail.com>
areRenderRelevantPartsEqual did not compare the tool part output field,
so when the AI updated a todo list (e.g., marking items completed) the
ToolPart memo comparator returned true and skipped re-render. The UI
stuck showing stale task status.
Fix: add output reference comparison for tool parts in
areRenderRelevantPartsEqual so streaming tool output updates trigger
re-renders correctly.
Co-authored-by: Shyamalan Kannan <yabuku@Shyamalans-MacBook-Pro.local>
* fix(pipeline): distinguish transport switch from real disconnect
WS_FALLBACK errors (e.g. ready timeout → SSE fallback) are transport
switches, not disconnections. No events are lost because lastEventId is
preserved across the switch.
Previously, every WS timeout triggered onDisconnect → onReconnect with a
full resyncDirectoryAfterReconnect, which:
- Missed idle parent sessions in candidate selection (root cause 1)
- Could overwrite in-flight SSE state with stale fetch data (root cause 4)
- Caused isConnected to flash false→true
Now: WS_FALLBACK fires onTransportSwitch (sets isConnected only).
Real disconnections (heartbeat timeout, network error) still fire the
full onDisconnect → onReconnect → resync cycle.
* fix(sync): relationship-aware reconnect with merge-not-replace
Two changes to resyncDirectoryAfterReconnect:
1. Candidate selection now also includes parent sessions of any child
sessions in the directory. Previously, if a child completed during
the disconnect gap (busy→idle), neither child nor parent was selected
because both appeared idle. The parent's task tool part would remain
permanently stale.
2. Parent resync merges parts instead of replacing. Previously, the
resync deleted parts for messages not in the fetch snapshot, which
could erase parts delivered by SSE events that arrived between the
fetch and the setState. Now only parts for messages in the snapshot
are overwritten; everything else is preserved.
* fix(sync): demand-load child session messages on access
Bootstrap only loads session metadata — messages are populated
exclusively by SSE events. When a user navigates to an old session
that spawned subagents, child session messages were never in the store.
Add useEnsureSessionMessages hook that detects this gap (session exists
in state.session but state.message[sessionID] is absent) and triggers a
background API fetch to load messages and parts.
ToolPart already calls useSessionMessageRecords(taskSessionId) which
returns empty when not loaded. Now it also calls useEnsureSessionMessages
to populate the store on first access.
* fix(sync): unmount-safe parent resync when child session goes idle
When a child session transitions to idle (completes), the sync layer
now schedules a targeted parts repair for the parent session's task
tool part. Previously this only happened when the ToolPart component
was mounted and had observed the child being active (taskChildSeenActive).
This covers:
- User navigated away while child was running
- App restarted with active subagent sessions
- SSE reconnect where child completed during disconnect
Uses the existing repairSessionParts mechanism with its 5s cooldown
to avoid redundant fetches.
* fix: type-check fixes for sync-layer parent resync
Fix TypeScript errors in Fix 5 implementation:
- Convert currentSessionId from null to undefined for resolveFallbackTaskSessionId
- Add default empty string for dir parameter in getScopedSdkClient
- Use explicit sessionID parameter for scopedClient.session.messages
All type-checks now pass.
* fix(sync): address PR review feedback on deduplication
- Use enqueuePartsRepair for session.idle parent resync instead of
direct repairSessionParts call. enqueuePartsRepair already has a 5s
cooldown to prevent redundant parallel API calls when multiple child
sessions go idle concurrently.
- Move useEnsureSessionMessages loading guard from component-scoped
React.useRef to a module-level Set keyed by directory:sessionID.
Prevents parallel fetches when multiple ToolPart instances mount
for the same child session.
* fix(sync): add missing semicolon on useEnsureSessionMessages call
Address Greptile P2 review comment on ToolPart.tsx:1931.
* fix(chat): restore desktop editor file-open in PendingChangesBar (#979)
Commit d1553ba removed the runtime?.editor branch from handleOpenFile,
breaking file-click in VS Code and Electron desktop runtimes.
Restore the 3-branch logic: editor.openDiff(patch) → editor.openFile()
→ openContextDiff() web fallback. Display paths remain relative.
* fix(chat): route non-git changed files to file view in desktop
DiffView requires a git repository to display diffs. In desktop
(Electron/Tauri), runtime.editor is unavailable, so non-git files
fell through to openContextDiff which shows "Not a git repository".
Route non-git files to openContextFile instead, which works without
git. Git-tracked files continue to use openContextDiff.
* feat(chat): per-turn changes dropdown for non-git; self-sufficient git sync in bar
- PendingChangesBar seeds git store + listens to onGitRefreshHint; works without RightSidebarTabs (fixes VS Code where bar never rendered).
- Bar is git-only now; non-git shows per-turn dropdown at end of completed assistant turns.
- Dropdown uses base-ui Popover for collision-aware position; icon-only collapse with tooltips at narrow container widths.
- Extract shared helpers (changedFiles.ts), popover list (ChangedFilesList.tsx), styles (changedFilesPopover.ts).
---------
Co-authored-by: Bohdan Triapitsyn <artmore@protonmail.com>
Save-as-plan and Add-to-notes actions were disabled on messages whose session
ran in a worktree, because session.directory alone does not reflect the
worktree attachment — the authoritative cwd lives in session-worktree-store.
Use useEffectiveDirectory (attachment cwd > worktree metadata > session.directory)
and resolve the parent project via the worktree map the sidebar already builds,
extracted into lib/projectResolution so session-ui-store and chat actions share
one resolver. No extra git calls.
Extend the text selection popover with an Add to notes action that runs the
selection through the shared text summarizer in note mode and appends the
distilled insight to the active project's notes.
Add Save-as-plan action on assistant messages that writes a markdown plan
into the project plans directory and suggests a title from the text. Plan
view opens a specific saved plan via targetPath, supports inline edits, and
can kick off improve or implement flows in a new or worktree session.
Ship the matching hidden magic prompts (plan.todo/improve/implement) so the
instructions applied by these flows are visible and editable in the Magic
Prompts page.
Remove the plan editor font override, CodeMirror now uses the app font stack.
* fix(task): prevent subagent silent failures in session resolution and polling lifecycle
Two failure points fixed:
1. Fallback session resolution window too narrow (3s):
- resolveFallbackTaskSessionId now accepts hasRetried boolean
- First attempt uses 3s window (avoids binding wrong sessions)
- Subsequent attempts widen to 8s (handles late-appearing child sessions)
- Uses useState + useEffect instead of side effects in Zustand selector
2. Polling stops before child results are captured:
- When child session goes idle before parent sees it active, polling
would stop without fetching results
- Added final-fetch-before-stop: a one-shot delayed fetch that runs
after the settle grace period, ensuring child results are captured
- Uses taskFinalFetchDoneRef to guarantee exactly one final fetch
- Preserves existing happy path (active child → normal settle timer)
* fix(task): serialize final fetch after polling stops
Move the subagent final-fetch into a dedicated effect that runs only after
polling has stopped, avoiding races between polling writes and final-fetch
writes to the child sync store.
Also retry safely on final-fetch failure by reopening polling instead of
marking the final fetch as done before the request succeeds.
* feat(task): distinguish child session errors from normal idle
When a subagent terminates with an error, abort, timeout, or failure,
the parent session could not tell it apart from a normal completion.
Changes:
- event-reducer.ts: session.error now stores { type: 'error' } instead of
{ type: 'idle' }, so consumers can distinguish failed from completed sessions
- useSessionActivity.ts: add 'error' phase to SessionActivityPhase and
isError flag to SessionActivityResult; error phase is non-active (like idle)
but distinguishable via isError
- ToolPart.tsx: pass childSessionError to TaskToolSummary and show
'Subagent session ended with an error.' instead of the generic
'No subagent session id on task metadata.' when the child errored
Other consumers of session_status that only check 'busy'/'idle' are
unaffected — 'error' falls through to existing idle-like behavior.
* Revert "feat(task): distinguish child session errors from normal idle"
This reverts commit b3cc749bde16ed8fc55e4f304dcc455484335fba.
* fix(task): delay fallback retry window widening
---------
Co-authored-by: Bohdan Triapitsyn <artmore@protonmail.com>
* fix: show question content in ToolPart instead of 'Awaiting response...' after refresh
Previously, when the question tool was pending/running or completed
without parseable output, the ToolPart fell through to a generic
'Awaiting response...' message. After a page refresh or app restart,
this made questions appear empty even though the tool state still
contained the question input data.
Now the ToolPart reads question text, headers, and options from the
tool state's input field, ensuring question content persists across
refreshes regardless of QuestionCard store availability.
Fixes#879
* fix: restore QuestionCard after refresh and pause working status during active questions
Two fixes for question tool UX:
1. ChatContainer: sessionIsWorking now returns false when there are
active questions (same as it already did for permissions). This
prevents the status row from showing 'Asking question...' and
instead shows the QuestionCard.
2. sync-context: resyncDirectoryAfterReconnect now re-fetches
pending questions via listPendingQuestions(). Previously only
sessions and messages were re-fetched on SSE reconnect, so
questions asked during disconnection were lost, causing
QuestionCard to disappear after page refresh.
Refs #879
* fix: hide assistant working status while questions are pending
The assistant status hook only special-cased pending permissions, so
question tools still surfaced 'Asking question...' after refresh even
when the UI was already waiting on a QuestionCard response.
Treat pending questions like other blocking requests by clearing the
working indicator until the user answers.
Refs #879
* fix: merge question/permission stores instead of full replace on bootstrap and reconnect
The root cause of QuestionCard disappearing after refresh was a race
condition between SSE events and HTTP bootstrap. Bootstrap and reconnect
both did full replacement of state.question, wiping SSE-delivered data
that arrived between the HTTP call initiation and response arrival.
Changes:
- bootstrap.ts: question and permission stores now use merge semantics.
Only sessions present in the API response are overwritten. Sessions
absent from the response are left untouched (they may hold SSE data).
- sync-context.tsx: reconnect question resync uses the same merge pattern.
No longer clears question entries for sessions not in the API response.
- bootstrap.ts: sdk.question.list() now passes directory parameter to
scope the query correctly.
This ensures SSE-delivered question data survives the bootstrap window,
while still allowing the API response to be authoritative for sessions
it covers.
Refs #879
* fix: prune stale pending requests after reconnect
---------
Co-authored-by: Bohdan Triapitsyn <artmore@protonmail.com>
Add reflect-metadata bootstrap so desktop sidecar no longer crashes on startup.
Update SDK v1.4 compatibility for model variant and diff payload handling.
Unify write/edit/apply patch expanded previews and hide write success output noise.
Roll back aggressive chat reuse paths that froze message parts, tool state, and completed assistant bodies when sessions were inactive or backgrounded.
- Keep older assistant messages in the active turn stable while new content streams
- Prevent existing tool rows from rerendering when new tool activity is appended
- Tighten message and tool memo comparisons to isolate render work to changed rows
- Add startup feature flag for plan mode from OPENCODE_EXPERIMENTAL* env vars.
- Stop recurring app health polling and keep a one-time startup check.
- Skip plan-mode synthetic parsing and plan tab/file work when flag is off.
* fix: resync session state after SSE reconnect to prevent stuck subagent UI
When a subagent completes while the page is in the background (common on
mobile PWA and desktop webview), the final SSE events are lost. The UI
then stays stuck on 'Waiting for subagent activity...' because:
- part.state.status never transitions to 'completed'
- session_status is never updated to 'idle'
- activeLatched remains true indefinitely
Fix:
- Add onReconnect callback to event pipeline, fired after SSE reconnect
- Add pageshow listener for bfcache restores (mobile PWA back-forward)
- On reconnect, re-fetch session list for directories with active sessions
- Pass explicit directory to useSessionActivity in ToolPart for subagents
to ensure the correct child store is queried
Closes#810
* fix(chat): resolve pending subagent task binding before metadata arrives
* fix: restore subagent activity and tool visibility after reconnect
- Resyncs session status and child session data after SSE reconnect
- Ensures child task tool messages are read from the correct directory
- Prevents stale assistant fallback from keeping sessions stuck as active
---------
Co-authored-by: Bohdan Triapitsyn <artmore@protonmail.com>
- Add error icon and colored background/border for error messages
- Add break-all and max-w-full to prevent long error text overflow
- CSS: word-break and overflow-wrap for inline code in error messages
- Add JsonTreeViewer component with collapse/expand for nested objects and arrays
- Add rainbow colors by depth level using CSS color-mix() with syntax theme tokens
- Add virtualization support (@tanstack/react-virtual) for large JSON files (>200 nodes)
- Add JsonTreeView wrapper with Expand All / Collapse All toolbar
- Integrate into FilesView: tree/text toggle button, JSON file detection
- Integrate into ToolPart: auto-detect JSON tool outputs, render as tree
- Integrate into ToolOutputDialog: JSON tree view in expanded dialog
- Add jsonTreeUtils.ts: parse, flatten, path utilities
No new dependencies - uses existing @tanstack/react-virtual.
Colors derived from existing syntax.* theme tokens - works across all themes.
Co-authored-by: Bohdan Triapitsyn <artmore@protonmail.com>
- Add HTML escaping for user messages in Markdown mode
- Fix agent mention link rendering order issue
- Plain mode remains unchanged (uses React elements)
Tested:
- User messages: <div> now displays as <div>
- Agent mentions render correctly as clickable links in Markdown mode
Co-authored-by: 郭皓楠 <guohaonan@MacBook-Neo.local>
* fix: added desktop app background throttling
* perf: add streaming debug metrics panel
- Show streaming performance metrics in the debug panel
- Auto-enable stream profiling while the panel is open
- Add JSON export for sharing UI and VS Code metrics
* perf: batch streaming updates more aggressively
- Buffer message deltas and metadata updates to cut render churn
- Skip no-op part updates before they touch the message store
- Fix the desktop debug panel shortcut binding
* perf: split streaming event handling and coalesce deltas
- Move streaming content events onto a dedicated fast path
- Defer non-critical stream side effects off the hot path
- Merge repeated message delta events before they reach the UI
* perf: isolate streaming rows from chat rerenders
- Memoize chat rows against render-relevant message changes only
- Read live assistant text directly from store to narrow streaming updates
- Split the active streaming entry from the stable message list path
* perf: streamline chat streaming and SSE proxying
- Reduce chat rerenders around the active streaming path
- Simplify server SSE forwarding to avoid duplicate proxy work
* fix: preserve the first streaming text chunk
- Show the initial text chunk immediately before batched deltas arrive
- Bypass batching for the first text or reasoning part update
- Keep later streaming updates buffered for performance
* perf: align streaming/render hot paths with opencode parity
* perf: harden turn/cache stability and stale delta suppression
* fix: stabilize chat rendering and disable timeline interactions
- Disabled timeline dialog access from shortcuts, commands, and chat input
- Reduced chat render churn by simplifying message list and turn staging behavior
- Improved session-switch stability to prevent update-depth crashes
* perf: track static message rerenders during streaming
* perf: reduce sorted-mode activity rerender fanout
* perf: reduce chat rerender fanout and add active-turn metrics
- Reduced sorted-mode rerender coupling by tightening turn context propagation
- Added a metric for static rerenders outside the active turn during streaming
- Exposed new chat render counters in the debug panel for parity tracking
* fix: keep sorted activity mounted while stream grows
* fix: stabilize session and history scroll rendering
* refactor: decouple server routes from index
* refactor: extract fs module from server index
* refactor: move opencode route ownership into module
* refactor: extract notification route registration
* refactor: extract opencode and notification runtimes from index
* refactor: extract settings runtime and complete server modularization pass
* refactor: modularize server config, skills, icons, and tunnel routes
* refactor: extract server modules from monolithic index.js
Split proxy, routes, runtime helpers, and notification emitter
into dedicated modules under packages/web/server/lib/.
* refactor: replace session/message stores with SSE-driven sync layer
Delete ~9200 lines of old architecture (useEventStream, messageStore,
sessionStore, useSessionStore, questionStore, useTodoStore, client SSE).
New sync layer: event pipeline with coalescing + 16ms flush, pure event
reducer, per-directory child stores with LRU eviction, cursor pagination,
optimistic updates, deferred timeline staging, text throttle.
Migrate all UI consumers to sync hooks (useSessionMessages,
useSessionMessageRecords, useSessionStatus, useSessionPermissions, etc).
Strip session-ui-store to UI-only state, delegate SDK ops to
session-actions with abort-if-busy, optimistic store updates, and
response merging for revert/fork/archive/delete.
Add notification-store for SSE-driven session attention tracking,
cross-directory GlobalSessionStatusStore for sidebar indicators,
client-side diff snapshot sanitization to prevent memory bloat,
and revert message filtering via useVisibleSessionMessages.
* feat: notification store, session actions, activity detection
Add notification-store.ts for SSE-driven attention tracking.
Add sanitize.ts to strip diff snapshot memory bloat.
Add session-actions.ts with optimistic revert/fork/archive/delete.
Improve useSessionActivity with incomplete-message fallback.
Delete useServerSessionStatus polling hook.
* fix: add directory param to all SDK calls, fix command/shell/abort routing
All SDK calls in session-actions.ts now pass directory parameter —
required by OpenCode server to scope session operations. Without it,
abort, commands, revert, fork, and other operations returned 500.
Add routeMessage() in session-ui-store for shell mode (session.shell),
slash commands (session.command), and normal prompts. Command lookup
checks both sync child store and useCommandsStore. Handle /compact
locally via session.summarize().
Implement getContextUsage() to restore header context usage display —
reads token counts from last assistant message in sync store.
* refactor: replace custom API proxy with http-proxy-middleware
Remove ~280 lines of custom proxy code: forwardSseRequest,
forwardGenericApiRequest, collectRequestBodyBuffer, header
manipulation, hop-by-hop filtering, SSE block buffering.
Replace with single createProxyMiddleware() call that handles
SSE streaming, large bodies, and timeouts out of the box.
Dynamic router for OpenCode port changes after restarts.
Auth headers injected via proxyReq hook.
Keep: readiness gate, Windows session merge, API prefix detection.
* perf: targeted event draft cloning to fix streaming render cascade
Event handler was eagerly cloning all state slices on every event,
breaking Zustand selector referential equality. During streaming
(~60 events/sec), this caused every subscriber to re-render regardless
of which slice actually changed.
Now only clones fields the specific event type mutates. Also extracts
StatusRowContainer to isolate high-frequency useAssistantStatus
subscription, removes dead messageStreamStatesMap subscription from
ChatContainer, and narrows useAssistantStatus to only track last
assistant message parts.
MessageList renders: 1972 → 296 per streaming session (-85%).
* fix: null safety for sync state slices
Add defensive ?? {} guards on permission, question, session_status,
and message record access. Prevents crashes when child store state
is partially initialized during bootstrap.
* perf: dedup inflight SDK calls, extract concurrency util, delay PR tracking
Extract mapWithConcurrency to shared lib/concurrency.ts. Add in-flight
dedup for loadProviders/loadAgents to prevent concurrent duplicate SDK
calls. Delay initial PR background tracking by 5s to reduce startup
CPU burst.
* fix: header session lookup across all child stores
Session title and context panel click failed when session belonged to
a different directory than the current child store. Fall back to
getAllSyncSessions() to search all initialized stores.
* chore: bump @opencode-ai/sdk to 1.3.5
* docs: add sync event handling guide
* Optimize session prefetch and improve delete/archive UX
- Add settlement delay to session prefetch to avoid race conditions on
rapid session switches
- Reduce git diff prefetch and session cache limits for better performance
- Implement optimistic UI updates for session delete/archive operations
with proper rollback on failure
- Wire session prefetch hook into SessionSidebar with sync integration
* Add file content cache and sync optimizations
- Wrap FilesAPI with in-memory LRU cache for file content with dual
constraints (entry count and byte size)
- Optimize chat timeline scroll restoration using useLayoutEffect
- Preserve React references in message and part arrays to prevent
unnecessary re-renders when prepending history
- Add session prefetch TTL cache to prevent redundant fetches
- Integrate session prefetch cache clearing with eviction flow
* Improve session sidebar error handling and add diff prefetch filtering
Load active and archived sessions independently using Promise.allSettled
to prevent one failure from blocking the other. Add retry logic to session
API calls and skip large files during diff prefetch to improve performance.
* Replace sendMessage with optimisticSend wrapper
Introduces optimistic UI updates for normal chat messages to provide
instant feedback. Messages appear immediately in the UI while the API
call executes in the background, with automatic rollback on errors.
* perf: split stores, proper optimistic send, fix revert/directory bugs
- split session-ui-store into voice/input/selection/viewport stores
to reduce subscriber re-evaluation during streaming
- wire optimisticSend through useSync shadow Map infrastructure
matching OpenCode's pattern (no heuristic part detection)
- port OpenCode Identifier.ascending ID format for correct sorting
- pass messageID to promptAsync to prevent duplicate messages
- fix worktree directory not propagating to session actions
(dynamic dir() via opencodeClient.getDirectory)
- fix setCurrentSession accepting directoryHint for new sessions
- fix revert not hiding messages (session limit was 5, bumped to match loaded count)
- fix revert optimistic message removal from store
- fix load-more flicker (useLayoutEffect scroll compensation)
- add prefetch TTL cache, file content LRU cache
- add session prefetch for adjacent sessions
- add instant archive/delete (optimistic before SDK call)
- migrate legacy window.__zustand_session_store__ to session-ui-store
- add retry + independent error handling for archived sessions
- add AGENTS.md performance rules
* perf: startup optimization — dedup, caching, light git status, diff rendering gates
- defer diff prefetch to git tab open, reduce concurrency 4→2, skip >500 changed lines
- cap project git checks concurrency (2), directory status probe (3)
- dedup provider/agent loading, github auth, worktree list (in-flight + TTL caches)
- delay PR tracking 5s, cache 403 search failures per-repo
- coalesce settings PUT (200ms debounce), cache settings GET (2s TTL)
- cache canonical directory resolution (60s TTL)
- persist missing directory status to localStorage (10min TTL)
- light/heavy git status: polling skips numstat+line counting+rev-list
- large diff rendering gate (>500 lines → "render anyway" button)
- tokenization degradation for >500KB files in Pierre
- parallelize main.tsx pre-render awaits
- batch sidebar file tree expanded paths restoration (3 at a time)
- remove bare useConfigStore() subscription in AgentsPage
- sync worktree sandboxes to OpenCode SQLite DB
- fix RightSidebarTabs ternary → explicit tab matching
- defensive guards on sync state (session_status, permission, question, message)
* fix: add defensive guards on remaining sync state field accesses
guard session_status, permission, message, todo, part, config with ?? {}
in useDirectorySync selectors, session-cache, and bootstrap
* fix: add missing directory dep to useCallback in use-sync.ts
* fix: preserve diffStats when light-mode polling overwrites status
* perf: optimize startup git status polling and diff rendering
Preserves diff stats when lightweight polling updates repository status
Reduces startup overhead with smarter git polling and store updates
Adds detailed optimization and migration docs for next performance steps
* fix: keep chat diff stats stable during git status updates
Prevents lightweight git polling from dropping diff statistics
Keeps MessageList diff indicators consistent while status refreshes
Improves reliability of git-aware chat rendering
* fix: user animation replay, queued message variant, startup provider loading
- consume animation ID after first play to prevent re-animation
on neighbor assistant message completion
- capture send config (model/agent/variant) at queue time matching
OpenCode's FollowupDraft pattern instead of re-resolving at send time
- replace one-shot startup recovery effect with polling interval
that retries every 2s until providers and agents load
- fix optimistic bridge to avoid re-render loop (stable ref wrappers)
* chore: update tauri to 2.10.3 and all plugins to latest
- tauri 2.9.4 → 2.10.3
- tauri-build 2.5.3 → 2.5.6
- tauri-plugin-dialog 2.4.2 → 2.6.0
- tauri-plugin-log 2.7.1 → 2.8.0
- tauri-plugin-shell 2.3.3 → 2.3.5
- tauri-plugin-updater 2 (floating) → 2.10.0 (pinned)
- @tauri-apps/api ^2.9.0 → ^2.10.1
- wry 0.53.5 → 0.54.4 (transitive)
* refactor: decouple web server index orchestration runtimes
* fix: align VS Code runtime behavior with web and reduce draft view CPU load
- Queue VS Code bridge and SSE startup requests until API readiness to avoid false bootstrap failures
- Make agent manager actions directory-aware and remove real worktrees with safer partial-failure handling
- Replace heavy logo animation path with a lightweight pulse to cut draft-session CPU usage
* fix: restore auto-selected file sending in chat input
- Send server-selected files as proper file URLs in the message payload
- Include server-backed attachments in submit flow instead of dropping them
- Restore queued-message attachments through the refactored input store
* fix: restore session model selection consistently on session switch
- Restore agent, model, and variant from the latest loaded user message for each session
- Wait for session messages before applying restored selections to avoid stale or missing state
- Remove legacy session-choice inference paths that caused overlap and instability
* fix: restore permission replies and auto-accept across sessions
- Scope permission and question replies to the target session directory so answers take effect reliably
- Make permission auto-accept immediately handle pending requests and react to new permission prompts
- Keep parent-session handling working for child-session requests through the shared response path
* feat: add reusable fuzzy branch fuzzy-search helper and dialog integration (#798)
* feat: add reusable fuzzy branch search for worktrees
* chore: drop planning docs from feature branch
* feat: make worktree branch refresh manual
* feat: add configurable session retention action
* refactor: centralize global session state in ui store
* fix: cancel debounced permission push after reply
* docs: clarify global and directory session store architecture
* docs: refine agent development rules and session activity guidance
- Clarify agent code of conduct and durable development patterns
- Add explicit shared-store rerender and live-state guidance
- Narrow session activity fallback to avoid stale working state
* chore: updated .gitignore
---------
Co-authored-by: Iuliia Ivashko <yulia.ivashko@gmail.com>
* fix: improve session sidebar tooltip and truncation behavior
- Keep new-draft tooltip anchored to its trigger button
- Fix minimal-mode worktree/group header text truncation
- Tune minimal-mode right padding to reduce early label clipping
* fix: render reasoning through markdown pipeline
- Use Streamdown rendering for reasoning in live chat mode
- Remove italic styling from reasoning text
- Render expanded reasoning content with MarkdownRenderer
* chore: remove legacy electron dependencies
- Removed unused Electron packages from root and UI manifests
- Deleted obsolete Electron context menu type declaration
- Regenerated lockfile after dependency cleanup
* fix: handle non-repository folders in git status API
- Prevent 500 errors when status is requested outside a valid Git repo
- Improve repository detection using `git rev-parse --git-dir`
- Reduce noisy server logs for expected non-repo status checks
* fix unloaded session chat layout flicker
* fix: reduce noisy TTS status polling
Cache and dedupe TTS status requests, and only check provider availability when the related voice features are enabled so disabled voice setups stay quiet.
* perf: throttle background PR git status refreshes
* fix: improve VS Code Explorer file drop mentions in chat
- Add Explorer context action to insert selected files as @mentions.
- Handle Explorer drag-and-drop to prefill @file mentions instead of attachments.
- Prevent duplicate plain-path text when dropping multiple files.
* fix: deduplicate recent sessions in VS Code sidebar
- Hide sessions from main list when already shown in recent
- Apply dedup only in VS Code runtime
- Keep session search behavior unchanged
* feat: add true HMR dev flow for VS Code extension
- Load VS Code webview from Vite dev server with React refresh preamble
- Add `vscode:dev` runner that starts watchers and opens Extension Development Host
- Update VS Code dev docs and scripts to use the new HMR startup flow
* feat: polish VS Code session sidebar and attachment UX
- Add resizable sessions sidebar in VS Code layout
- Tighten session list spacing and hover behavior in VS Code
- Remove bulk file/image attach success toasts while keeping error toasts
* fix: make textarea focus highlight render inside
Apply inset focus ring to shared textarea component
Prevent focus border from appearing clipped near container edges
* fix: build desktop sidecar with target-matched architecture
Map Tauri target triples to Bun compile targets
Pass explicit Bun compile target for sidecar builds
Prevent x86_64 releases from shipping arm64 sidecar binaries
* fix: allow Windows git custom binary paths
Enable safe use of resolved custom git executable paths
Prevent git status failures when path contains restricted characters
Keep default behavior unchanged for plain git invocations
* fix: allow toggling diff line wrap on mobile
Stops forcing wrapped lines in mobile diff view
Line-wrap button now reflects and applies user preference
* fix: align VS Code managed server env with shell settings
Import login-shell environment variables before starting managed OpenCode
Apply Windows and Unix shell snapshot resolution for parity
Improve proxy-dependent provider connectivity in VS Code extension
* fix: respect user scope when adding MCP servers
Prevent user-scope MCP entries from being written to project config
Keep project writes only for explicit project scope
* fix: show linked GitHub issues and PRs as user message attachments
Preserve synthetic issue/PR context parts during message filtering.
Convert synthetic GitHub context JSON into attachment-style user parts.
Open issue/PR attachment links via shared external URL helper.
* fix: restore and polish project notes in sessions sidebar
Restored the Notes button in the left sessions sidebar header
Improved notes panel layout with wider dialog, larger notes area, and project name in the header
Refined todo rows with inline expand/collapse text and stable action/checkbox alignment
* fix: hide sidebar footer actions in VS Code runtime
Remove Settings, About, and Shortcuts buttons from the sessions sidebar footer in VS Code
Keep update button behavior unchanged across runtimes
* fix: normalize Windows paths for VS Code session loading
Canonicalize drive-letter casing in session path normalization
Align VS Code workspace path persistence with the same Windows path format
Normalize client directory context before API calls to keep session filtering consistent
* fix: open linked GitHub attachments with shared URL helper
Use runtime-aware external URL opening for issue/PR attachment links.
Keep GitHub attachment labels readable without altering normal file name rendering.
* fix: keep user MCP config writes out of project files
Respect user scope when selecting config write target
Prevent MCP user entries from being written to project opencode.json
* fix: prevent project menu from overlapping new session button
Align project menu positioning for non-git and git project rows
Avoid kebab-menu and plus-button overlap in sessions sidebar
Bohdan Triapitsyn